OVERVIEW
Introduction
This is an uncompressed HDMI2.0 4K60 Fiber Extender, the resolution can up to 3840*2160@60Hz 4:4:4, the bandwidth is 18GBPS, the distance can up to 2km over one single LC single mode fiber cable, compatible with both single-mode and multi-mode fiber optic cable, the connector is using the LC type.
This 4K60 fiber optic extender is using CWDM technology with 6 wavelength lasers i. The data rates of the 1270nm/1290nm/1310nm/1330nm lasers are 6Gb/s, these 4 CWDM lasers transmit the HDMI TMDS signal from TX to RX unit, The 1490nm/1550nm laser data rate is 1.25Gb/s, which transmit the EDID, HDCP2.2, audio bidirectionally. With the 4-PIN DIP switch to support the EDID management, it can be more compatible to different applications.
Features
• Using the CWDM Single Fiber Technology.
• With 1270/1290/1310/1330/1490/1550nm DFB lasers inside
• Compliant with HDMI2.0, HDMI1.4, HDCP2.2
• The distance up to 2km over one single-mode or OM3 multi-mode Fiber Cable
• Uncompressed resolution 3840×2160@60Hz/4:4:4, 18Gb/s(600M Hz pixel clock);
• 1xLC Fiber Connector;
• Support 3.5mm audio embedded and HDMI loop out on the TX
• Support 3.5mm audio de-embedded and dual HDMI output on the RX
• Zero frame delay;
• Supports EDID management by DIP switch
Specification
Application Diagram
Dimensions(mm)
