OVERVIEW
FIBER-DVI-110TR
2 KM 1 core LC fiber extender with EDID management
Version: V2016.001
1. Introduction
FIBER-DVI-110TR is a 1 core LC connector DVI Fiber Optic Extender, with single model fiber cable can transmit to a distance of 2km, resolution can reach WUXGA(1920*1200@60Hz), the bandwidth is 10Gbps. No loses, compression, latency during the whole transmission. With optoelectronic multiplex technology, this equipment consists of two parts: Transmitter and receiver. Transmitter using the V-EDID technology, it can supports EDID learning and coding to reach the best display effect. With EDID leaning technology in the transmitter, it can adopt different resolution display systems, it help users to make the project neat, convenient and stable.
2. Features
• Transmits the DVI signal to 2 km with 1 core single fiber cable.
• The max resolution can up to 4K30Hz
• No loses, compression and latency during the transmission
• Supports EDID learning and coding
• Support 7×24h working
• Support DVI1.0 protocol and HDMI1.4
3. Specification
4. Packing
5. Connection diagram
6. System installation requirements
6.1 Hardware
Devices need to have the DVI interface and support DVI resolution
6.2 Software
There is no special requests as long as the DVI image controller has been well installed.
6.3 AC/DC Suggestions
Transmitter has the power protection system, users can use other adapters which can provide 5V power supply, for the receiver should use the adapter which come together in the packing.
